|
The HD4SR will pick up and stack 3' by 4' and 4' by 4' dry large square bales. It is a well designed machine, built to be used in most farming conditions. It is constructed of heavy wall tubing along with custom designed cylinders to give maximum life. Stacks are aligned both vertically and horizontally for easy loading to a truck with a Bale Claw or Squeeze. For optimum performance of the Auto Align Bale Skoop, bales must be tight and dry.
The HD4SR can stack 3' by 4' dry bales six bales high on strings or can stack 4' by 4' dry bales four bales high on or off strings. The Auto Align® Bale Stacking System allows 1 person to roadside 40 - 60 tons per hour.
The Auto Align® Bale Skoops are patented machines.
|
|
|
 |
Auto Align® System
This system consists of the alignment arms and the loader. With the Auto Align System the Bale Skoop can pick up bales in the same direction the field was baled.
Benefit: Will work on corrugated, border dyke or pivot tracked land.
|
|
|
 |
Full Width Axle and Tire Options
A 22,000 pound capacity axle is bolted to the Bale Skoop. The HD4SR comes standard with High Floatation Implement Tires, but can also be equipped with High Floatation Terra Tires.
Benefit: Less soil compaction and customer has choice of tires to fit operation.
|
|
|
Pick-Up Bales in any Orientation
Bales can be picked up on the go at speeds up to 5 mph. In the offset position the bales are automatically aligned with the two alignment arms connected to the front of the loader. The bales will slide sideways and turn to fit between the arms as the Bale Skoop is driven forward.
Benefit: Operator can pick up bales in any orientation to greatly reduce loading time.
|
|
|
 |
Manifold for Hoses and Double Hitch Cradle
The manifold, located at the pokies games download end of the hitch, allows for easy servicing. The hitch is cradled at the pivot point for added strength. Plastic plates are placed at the contact points to decrease wear.
Benefit: Easy servicing, added strength, decrease in wear.
|
|
 |
Fast and Accurate Stacking
The top bale is held in place by the loader. At the stacking location, steering with the hitch allows the operator to see the existing stack so the load can be easily aligned. Once the bed is vertical, the alignment arms are opened, and the Bale Skoop is driven forward to remove the forklift teeth from under the stack.
Benefit: Steering with the hitch allows for easy alignment when stacking, a big time saver for the operator.
|
|
|
 |
Solid Ball Style Hitch and Labeled Hydraulics
A ball hitch is used on the Auto Align Bale Skoop. Hydraulic hoses which are labeled come out of the hitch and easily hook into the tractor outlets.
Benefit: The labeled hoses make for easy identification for the connection to the 3 remotes needed from the tractor.
|
|
 |
Bales Moved By Gravity
The bed of the Bale Skoop is inclined to allow bales to slide to the back of the bed by gravity.
Benefit: This method means less maintenance because there are no chains or push offs to move the bales.
|
|
|
|
