| APPLICATION CHART FOR 1995 - 2009 AUTO ALIGN® BALE STACKERS |
Stacker Model
|
Bale Size
|
Bale Orientation
|
# of Bales Per Load
|
HD4SR Bale Skoop
|
3' X 4' Dry Bale
|
on strings
|
6 |
| |
4' X 4' Dry Bale
|
on or off strings
|
4 |
| |
|
|
|
12SR Bale Skoop
|
3' X 3' Dry Bale
|
on strings
|
12 |
| * |
3' X 4' Dry Bale |
on strings |
6 |
| ** |
4' X 4' Dry Bale |
on strings |
4 |
| |
|
|
|
12K Bale Runner
|
3' X 3' Dry Bale |
on strings |
12 |
| |
3' X 4' Dry Bale |
on strings |
6 |
|
3' X 4' Dry Bale |
off strings |
4 |
|
4' X 4' Dry Bale |
on or off strings |
4 |
|
|
|
|
16K PLUS Bale Runner
|
3' X 3' Dry Bale |
on strings |
18 |
| |
3' X 3' Dry Bale |
off strings |
12 |
| |
3' X 4' Dry Bale |
on strings |
12 |
| |
3' X 4' Dry Bale |
off strings |
8 |
| |
4' X 4' Dry Bale |
on or off strings |
8 |
| |
|
|
|
16K PLUS Bale Runner
|
3' X 3' Wet Bale |
on or off strings |
12 |
|
3' X 4' Wet Bale |
off strings |
8 |
- All bales are put "on" strings from the baler.
- Bale stacker can stack bales that are a minimum of 6.5' and maximum of 8'.
- Bales are rotated 180 degrees by the bale stacker as they are picked up and stacked.
* If you are going to pick up the 3x4 or 4x4 dry bales with the 12SR - then you need to disengage the Grab Hooks by turning valve #5 in 2 turns and watch for the long alignment arms so they don't hit the stack due to them sticking out longer than the bale. You want to open the alignment arms prior to backing into the stack.
** If you are picking up only the 4x4 bales then you need to do the above, as well as remove the Bed Extensions by pulling out the pins and taking the extensions off the bed.
|
